Zephyr
We have a single BioHarness 3 system from Zephyr. This wearable sensor can stream physiological data
System Diagram
Using this Page
Resources
The setup and use of this system can get complicated. It is highly recommended to access the extensive documentation available from the Zephyr website:
https://www.zephyranywhere.com/resources/documentation
We have OmniSenseTM Software version 4.1, PSM Training ECHO setup
Device Charging and Setup
Charge Device
Secure the sensor into the cradle and connect USB to computer or other power source. Charging time is 1 hr to 90% battery and 3 hrs to 100%.
Configure Sensor
The BioHarness configured is to log and transmit data simultaneously. Logging format and other modes can be set using the Zephyr Cfg Tool located at
C:\Program Files(x86)\Zephyr\OmniSense\Tools
It is important to decide on a log format and other specific device settings in the beginning of setup. The overview of modes are:
- General: 1 Hz general parameters + 18Hz breathing waveform & heart rate RR
- General + ECG:: General + 250Hz raw ECG waveform
- General + Acceleration General + 100Hz Activity level (accelerometer magnitude)
- Summary: An extended General log containing additional parameters (Default)
- Summary + Waveform: Summary + 250Hz ECG + 100Hz accelerometer
- Summary + Development Summary + 1KHz ECG + 100Hz accelerometer
The details of the log formats can be found in the manuals, specifically starting on page 161 in the OmniSense? Live Help BioHarness can be configured to a number of different log formats. These are set using the Zephyr Cfg Tool, selecting the device, and using the drop down "log format" menu under the User Config tab.